Hydraulic Flanges, Blocks, Spacers, Plates, and Kits - 063

Hydraulic Flange kits consists of 2 flange halves, four bolts, and a nitrile O-ring. They are available in either Code 61 or Code 62 flange pattern. Flange block kits are drilled flange block used for adapting flange ends to a port fitting. They are available in either Code 61 or Code 62 flange pattern with female NPT, female SAE, male JIC or male ORFS threads. These include bolts and an O-ring. Flange plates are available as either Zero Pressure plates for keeping contaminants out of the system and Pressure plates/plugs for capping lines under pressure.

F-FO Series adapters are used to connect male NPT to a Flat Face Companion surface. The adapter is female NPT by Code 61 Flange Head, and is also available in ORB/SAE Thread (S-FO).

F-FO - Female NPT x C61 Flange Head

6 Items

The NACB series connector block allows for the connection of two Code 61 flange heads with O-ring grooves. The flat surface of the spacer block provides sufficient sealing surface on each side for t...

NACB - C61 Flange Connector Spacer BLOCK (For 2 O-Ring Flanges)

2 Items

Also as Blank or Blind flanges, these economical ZERO PRESSURE plates (not designed for system pressure) are used for covering of cylinder ports, pump ports, stub-out header lines, maintenance work c...

NSFB - C61 O-Ring Zero Pressure Blind Flange

10 Items

These are Code 61 flange halves sold as single pieces (does not include bolts or an O-ring). Due to age or corrosion, most users replace the whole kit for only a few dollars more (both flange halves,...

NSF-FLANGE-HALF - Code 61 Flange Half Only

10 Items

These zinc plated flange kits (also available in Stainless, suffix SS) consist of two flange halves, four bolts, and a nitrile O-ring (replacement O-rings are in the Hydraulic Adapters section), and ...

NSFO - Code 61 Split Flange Kit

10 Items

NSFP Series Flange Plugs are used for covering of cylinder ports, pump ports, stub-out header lines and maintenance work covers. Once these are properly installed with an O-ring and split flange kit...

NSFP - Code 61 O-Ring Flange Plug

10 Items

NW104 series flange block are drilled, flange blocks used for adapting Code 61 Flat Face Companion Flange to a female NPT port fitting. Available in either Code 61 (NW104) or Code 62 (NW45). With NW ...

NW104 - Female NPT x C61 Companion Flat Face Flange

8 Items

NW106 series flange block are drilled, flange blocks used for adapting Code 61 Flat Face Companion Flange to a female ORB port fitting. Available in either Code 61 (NW106) or Code 62 (NW49). With NW ...

NW106 - Female ORB x C61 Companion Flat Face Flange

6 Items

NW164 - Female ORB X C61 O-Ring Flange 90° Elbow

5 Items

NW165 - Female ORB X C61 Companion Flange 90° Elbow

5 Items

NW168 series flange block kits are drilled, flange blocks used for adapting Code 61 flanged ends to a 90° Female NPT port fitting. Available in either Code 61 (NW168) or Code 62 (NW188), these includ...

NW168 - Female NPT x C61 O-Ring Flange 90° Elbow

10 Items

NW169 - Pipe Socket Weld x C61 Companion 90° Elbow

7 Items

NW176 - Pipe Socket Weld x C61 O-Ring 90° Elbow

7 Items

NW23 - Schedule 80 Butt Weld x C61 Comp Flat Flange

7 Items

NW24 - Schedule 80 Butt Weld x C61 O-Ring Flange

7 Items

NW25 - Schedule 160 Butt Weld x C61 Companion Flat Face Flange

7 Items

NW27 - Schedule 160 Butt Weld x C61 O-Ring Flange

7 Items

NW3 - Pipe Socket Weld X C61 Companion Flange

7 Items

NW300 series flange block kits are drilled, flange blocks used for adapting Code 61 flanged ends to a Male JIC port fitting. Available in either Code 61 (NW300) or Code 62 (NW600), these include 4 bo...

NW300 - Male JIC x C61 O-Ring Flange Block Kit

5 Items

NW304 series flange block kits are drilled, flange blocks used for adapting Code 61 flanged ends to a male ORFS port fitting. Available in either Code 61 (NW304) or Code 62 (NW604), these include 4 b...

NW304 - Male ORFS x C61 O-Ring Flange Block Kit

5 Items

NW31 - Pipe Socket Weld X C61 O-Ring Flange

7 Items

NW34 - Schedule 40 Butt Weld x C61 Comp Flat Flange

5 Items

NW35 - Schedule 40 Butt Weld x C61 O-Ring Flange

6 Items

NW36 Series Flange Blanking Pressure Plates are used for sealing an opening on a pressurized system. Once these are properly installed with an O-ring and bolts, the system can be safely pressurized....

NW36 - C61 O-Ring Flange Blanking Plate-Pressure

10 Items

NW37 Series Flange Blanking Pressure Plates are used for sealing a flanged end on a pressurized system. Once these are properly installed with an O-ring, split flanges, and bolts, the system can be ...

NW37 - C61 Flat Comp Flange Blank Plate-Pressure

10 Items

NW4 - PIPE Socket Weld x C61 O-Ring Flange Block

16 Items

NW43 series flange block kits are drilled, flange blocks used for adapting Code 61 flanged ends to a Female NPT port fitting. Available in either Code 61 (NW43) or Code 62 (NW44), these include 4 bol...

NW43 - C61 O-Ring Flange Block Kit x Female NPT

9 Items

NW46 series flange block kits are drilled, flange blocks used for adapting Code 61 flanged ends to a Female ORB port fitting. Available in either Code 61 (NW46) or Code 62 (NW48), these include 4 bol...

NW46 - C61 O-Ring Flange Block Kit x FORB

8 Items

NW6 - Tube Socket Weld x C61 O-Ring Flange Block

10 Items

NW61 - Pipe Socket Weld x C61 Companion Flat Face Flange Black

9 Items

NW62 - Tube Flat Socket Weld x C61 Companion Flat Face Flange Block

11 Items

P-BWSF - Schedule 40 Butt-Weld x C61 O-Ring Flange Heavy Duty

17 Items

P-BWSFN - Schedule 40 Butt-Weld x C61 Flat Flange Heavy Duty

12 Items

P-WSF - Socket Weld x C61 Flange Head

6 Items

S-FO Series adapters are used to connect male ORB to a Flat Face Companion surface. The adapter is female ORB/SAE thread by Code 61 Flange Head, and is also available in NPT Thread (F-FO).

S-FO - Female ORB x C61 Flange Head

5 Items

T-SF - Tube Socket Weld x C61 O-Ring Head

15 Items

T-SFN - Tube Socket Weld x C61 Companion Head

15 Items

The AS-GP series connector block allows for the connection of two Code 61 Flat Face Companion Flanges. It also has a -4 NPT threaded port, a -4 SAE threaded port and a SAE and NPT plug, that can be ...

AS-GP - C61 Block Spacer with Gauge Port

8 Items

The AS-GP-PB series connector block allows for the connection of two Code 61 or Code 62 Flat Face Companion Flanges, along with a SAE threaded port. The SAE threaded port can be used to connect a SAE...

AS-GP-GB - C61 Gag Block with ORB Port

4 Items

The CP series connector plate allows for the connection of two Code 61 flange heads with O-ring grooves. The flat surface of the spacer plate provides sufficient sealing surface on each side for the...

CONNECTOR-PLATE-C61 - C61 Flange Connector Spacer Plate (For 2 O-Ring Flanges)

8 Items

The NACBX series connector block allows for the connection of two Code 62 flange heads with O-ring grooves. The flat surface of the spacer block provides sufficient sealing surface on each side for ...

NACBX - C62 Flange Connector Spacer BLOCK (For 2 O-Ring Flanges)

3 Items

Also as Blank or Blind flanges, these economical ZERO PRESSURE plates (not designed for system pressure) are used for covering of cylinder ports, pump ports, stub-out header lines, maintenance work c...

NSFBX - C62 O-Ring Zero Pressure Blind Flange

6 Items

NSFP Series Flange Plugs are used for covering of cylinder ports, pump ports, stub-out header lines and maintenance work covers. Once these are properly installed with an O-ring and split flange kit...

NSFPX - Code 62 O-Ring Flange Plug

6 Items

These are Code 62 flange halves sold as single pieces (does not include bolts or an O-ring). Due to age or corrosion, most users replace the whole kit for only a few dollars more (both flange halves,...

NSFX-FLANGE-HALF - Code 62 Flange Half Only

6 Items

These zinc plated flange kits (also available in Stainless, suffix SS) consist of two flange halves, four bolts, and a nitrile O-ring (replacement O-rings are in the Hydraulic Adapters section), and ...

NSFXO - Code 62 Split Flange Kit

6 Items

NW184 - Female ORB X C62 O-Ring Flange 90° Elbow

4 Items

NW185 - Female ORB X C62 Companion Flange 90° Elbow

4 Items

NW186 - Pipe Socket Weld X C62 O-Ring Flange 90° Elbow

4 Items

NW188 series flange block kits are drilled, flange blocks used for adapting Code 62 flanged ends to a 90° Female NPT port fitting. Available in either Code 61 (NW168) or Code 62 (NW188), these includ...

NW188 - Female NPT x C62 O-Ring Flange 90° Elbow

8 Items

NW189 - Pipe Socket Weld X C62 Companion Flange 90° Elbow

4 Items

NW26 - Schedule 80 Butt Weld x C62 Comp Flat Flange

7 Items

NW28 - Schedule 80 Butt Weld x C62 O-Ring Flange

7 Items

NW29 - Schedule 160 Butt Weld x C62 Flat Face Companion Flange

7 Items

NW30 - Schedule 160 Butt Weld x C62 O-Ring Flange

7 Items

NW38 Series Flange Blanking Pressure Plates are used for sealing an opening on a pressurized system. Once these are properly installed with an O-ring and bolts, the system can be safely pressurized....

NW38 - C62 O-Ring Flange Blanking Plate-Pressure

8 Items

NW39 Series Flange Blanking Pressure Plates are used for sealing a flanged end on a pressurized system. Once these are properly installed with an O-ring, split flanges, and bolts, the system can be ...

NW39 - C62 Flat Comp Flange Blank Plate-Pressure

8 Items

NW44 series flange block kits are drilled, flange blocks used for adapting Code 62 flanged ends to a Female NPT port fitting. Available in either Code 61 (NW43) or Code 62 (NW44), these include 4 bol...

NW44 - C62 O-Ring x Female NPT Flange Block Kit

7 Items

NW45 series flange block are drilled, flange blocks used for adapting Code 62 Flat Face Companion Flange to a female NPT port fitting. Available in either Code 61 (NW104) or Code 62 (NW45). With NW s...

NW45 - Female NPT x C62 Comp Flat Flange

6 Items

NW48 series flange block kits are drilled, flange blocks used for adapting Code 62 flanged ends to a Female ORB port fitting. Available in either Code 61 (NW46) or Code 62 (NW48), these include 4 bol...

NW48 - C62 O-Ring Flange Block Kit x FORB

6 Items

NW49 series flange blocks are drilled, flange blocks used for adapting Code 62 Flat Face Companion Flange to a female ORB port fitting. Available in either Code 61 (NW106) or Code 62 (NW49). With NW ...

NW49 - Female ORB x C62 Companion Flat Face Flange

6 Items

NW53 - Socket Weld x C62 Flange Head

5 Items

NW58 - Tube Flat Socket Weld x C62 O-Ring Flange Block

10 Items

NW59 - Pipe Socket Weld x C62 O-Ring Flange Block

9 Items

NW60 - Pipe Socket Weld x C62 Companion Flat Face Flange Black

8 Items

NW600 series flange block kits are drilled, flange blocks used for adapting Code 62 flanged ends to a Male JIC port fitting. Available in either Code 61 (NW300) or Code 62 (NW600), these include 4 bo...

NW600 - Male JIC x C62 O-Ring Flange Block Kit

5 Items

NW304 series flange block kits are drilled, flange blocks used for adapting Code 62 flanged ends to a male ORFS port fitting. Available in either Code 61 (NW304) or Code 62 (NW604), these include 4 b...

NW604 - Male ORFS x C62 O-Ring Flange Block Kit

5 Items

NW63 - Tube Flat Socket Weld x C62 Companion Flat Face Flange Block

10 Items

NW80 - Pipe Socket Weld X C62 Companion Flange

5 Items

NW81 - Pipe Socket Weld X C62 O-Ring Flange

5 Items

P-BWSFX - Schedule 80 Butt-Weld x C62 O-Ring Flange Heavy Duty

5 Items

P-BWSFXN - Schedule 80 Butt-Weld x C62 Flat Flange Heavy Duty

4 Items

T-SFX - Tube Socket Weld x C62 O-Ring Head

10 Items

T-SFXN - Tube Socket Weld x C62 Companion Head

10 Items

The ASX-GP series connector block allows for the connection of two Code 62 Flat Face Companion Flanges. It also has a -4 NPT threaded port, a -4 SAE threaded port and a SAE and NPT plug, that can be...

ASX-GP - C62 Block Spacer with 1/4-#04 Gauge Port

6 Items

The CPX series connector plate allows for the connection of two Code 62 flange heads with O-ring grooves. The flat surface of the spacer plate provides sufficient sealing surface on each side for th...

CONNECTOR-PLATE-C62 - C62 Flange Connector Spacer Plate (For 2 O-Ring Flanges)

5 Items

NSFP Series Flange Plugs are used for covering of cylinder ports, pump ports, stub-out header lines and maintenance work covers. Once these are properly installed with an O-ring and split flange kit...

NSFPCAT - CAT O-Ring Flange Plug

5 Items

These zinc plated flange kits (also available in Stainless, suffix SS) consist of two flange halves, four bolts, and a nitrile O-ring (replacement O-rings are in the Hydraulic Adapters section), and ...

NSFCAT - Caterpillar Split Flange Kit

5 Items

For years the hydraulic industry has struggled with maintaining system cleanliness. Once a component such as a valve, pump or cylinder is removed from the system, the hydraulic oil is more susceptibl...

NSFFK - Flange Lock Tool Kit

4 Items

For years the hydraulic industry has struggled with maintaining system cleanliness. Once a component such as a valve, pump or cylinder is removed from the system, the hydraulic oil is more susceptibl...

NSFFL - Leak Seal C61/C62/CAT Flange Lock Tool

12 Items

NSFO-SS - Code 61 Split Flange Kit (Stainless)

6 Items

These stainless flange kits consist of two flange halves, four bolts, and a nitrile O-ring (replacement O-rings are in the Hydraulic Adapters section), and are used in conjunction with either flanged...

NSFXO-SS - Stainless Code 62 Split Flange Kit

6 Items

N825 - Female ORB x Schedule 40 Butt Weld Full Coupling

4 Items

N835 - Female ORB x Schedule 40 Tank Weld Half Coupling

10 Items

N835B - ORB Carbon Steel Bevelled Weld Half Coupling

9 Items

N845 - NPT Carbon Steel Tank Weld Half Coupling

8 Items

N845B - NPT Carbon Steel Bevelled Weld Half Coupling

8 Items

NSW820 - FORB Carbon Steel Socket Weld Pipe Coupling

6 Items

NSW840 - FORB Carbon Steel Socket Weld Pipe Coupling

6 Items

NW12 - Flange Block C62 O-Ring x Companion 90°

1 Item

NW43-SS - C61 O-Ring Flange Block Kit x Female NPT (Stainless)

2 Items