NL1110 is a specialty, hardwall hose that is designed to convey non-oily, hot air up to 163°C (325°F) from manifold blowers on dry-bulk transport trucks or for in-plant compressors to holding tanks of dry bulk materials. This hot air is designed to eliminate moisture buildup in dry bulk products. Our NL1110 ContiTech Pyroflex II has a better 'force-to-bend' radius as compared to competing hot air blower hoses on the market and remains flexible over longer periods of time. In order to reduce waste when cutting bulk lengths, the most common length is 14' (works out to approximately 15' length with fittings installed), but we can cut it to another length if required. Its cover is resistant to heat, weathering, and ozone. This hose is not suitable for oily environments due to its EPDM rubber composition.

Construction: Tube: Black EPDM rubber blend. Cover: Wrapped, black EPDM rubber. Reinforcement: Wire helix between synthetic textile plies.

Typical Fittings: D44GY-AL Aluminum camlocks with Viton gasket, WC-SS crimp sleeves, N70-C202 strapping, N52 punch clamps.

Temperature Range: -29°C (-20°F) to +163°C (325°F)

Warning: Use a high temp Viton gasket with Hot Air.

Cut Method: Sawzall or Hacksaw & Side Snips for Wire-Wear Safety Gloves

Marketing: <This is a hardwall hose, not a flexible accordion ducting>