Pressure Washer Nozzles, Guns, Wands, and Spray Tips - 155

These colour coded pressure washer spray tips incorporate a straight through plug to connect to a corresponding coupler (i.e. 1/4" CST4B). The orifice size of the nozzle determines the operating pressure of your machine. As a rule of thumb, the smaller the orifice, the greater the restriction of water flowing through the machine, and hence increased pressure. Therefore, choosing a nozzle with too large of an orifice will reduce operating pressure, and choosing a nozzle with too small an orifice will limit water flow and possibly create an excessive load on the machine. Available orifice sizes are listed in the table below.

This kit contains a selection of commonly used items for pressure washer service, such as brass straight-thru couplers, plated steel plugs, replacement o-rings and PTFE tape.

N66-SK3000 - Pressure Washer Quick Connect Kit

1 Item

This is a popular, industrial grade gun suitable for up to 5000 psi water, 10.5 gpm, and 150°C (300°F). It is available with either a 1/4" or 3/8" Female NPT inlet and a 1/4" Female NPT outlet.

J4840 - Commercial Washer Gun Only - 1/4" NPT Inlet

1 Item

This is a popular, industrial grade gun suitable for up to 5000 psi water, 10.5 gpm, and 150°C (300°F). It is available with either a 1/4" or 3/8" Female NPT inlet and a 1/4" Female NPT outlet.

J5030NP - Heavy Duty Washer Gun Only - 3/8" NPT Inlet

1 Item

This is a popular, industrial grade gun suitable for up to 5000 psi water, 10.5 gpm, and 150°C (300°F). It is available with either a 1/4" or 3/8" Female NPT inlet and a 1/4" Female NPT outlet. The "...

J5030NPW - Weeping Washer Gun Only - Special/Drip

1 Item

These are our HD guns with a CPST5 male QD nipple inlet and a wand with a CST4B brass coupler on the end.

J5030NP-__QD - Gun & Wand Assemblies With Quick Connect Ends

5 Items

These have 1/4" male NPT ends and are designed to be threaded into the guns. Max 4000 psi, 10.5 gpm, and 150°C (300°F).

J5188D__ - Insulated Wand Only (Lance, Plated Steel) with NPT ends

6 Items

These have 1/4" male NPT ends and are designed to be threaded into the guns. Max 4000 psi, 10.5 gpm, and 150°C (300°F).

N5110-SS - Insulated Stainless Steel Wand Only (Lance)

4 Items

These are useful in confined spaces, for car washes, or to get under hard to reach spaces. Maximum 2500psi & 90°C (195°F). 1/4" MNPT threads.

J5182D18 - Flexible Wand For Pressure Washer Gun

1 Item

J5188HANDLE - Optional Bolt-On Handle for Wand

1 Item

These are for reaching high areas or walls. They are rated to 4000psi (max 8 gpm) and 93°C (200°F).

J5200 - Telescoping Pressure Washer Wand Max - 4000 PSI

2 Items

Fits J5200 belt wand.

J5200-BELT - Support Belt For Telescoping Pressure Washer Wand(Belt Only)

1 Item

This is designed for use when dual pressures or orifice sizes are needed for cleaning applications, such as spraying cleaning agents with low pressure through an injector valve and then cleaning with...

N5130 - Double / Twin Wand (Lance) - with or without gun

2 Items

These are popular on pressure washer garden inlets. The grip sleeve allows for easy tightening by hand, and the spring helps support the fitting from vibration and torque. They come with a mesh scr...

N535GR-BR - Grip Sleeve Brass Swivel Female GHT W/ Filter x MNPT Spring

2 Items

This adjustable multi-function nozzle provides 6 spray patterns, 0°, 15°, 25° 40° soap & rinse.

PW-MULTISPRAY - Multi-function Pressure Washer Nozzle 6 Spray Patterns

3 Items

This is a "flushing nozzle" which is best suited for flushing dirt, mud and grime from more fragile areas or bare wood.

T-GREEN - Quick Disconnect x Green 25° Spray Tip

15 Items

This is a "blasting nozzle" that delivers a concentrated stream of water for removing stubborn or hard to reach marks or materials.

T-RED - Quick Disconnect x Red 0° Spray Tip

14 Items

This is a brass "chemical nozzle" which is used to apply soap and light chemical solutions.

T-SOAP - Quick Disconnect x Black Soap Spray Tip

1 Item

This is a "wash nozzle" with a wide spray pattern for rinsing and moderate washing of more fragile surfaces, painted surfaces, equipment, vehicles, etc.

T-WHITE - Quick Disconnect x White 40° Spray Tip

15 Items

This is a "chiseling nozzle" for hard surfaces like concrete. The spray should be directed at a 45° angle to the surface and used like a scraper to remove paint, grease and dirt.

T-YELLOW - Quick Disconnect x Yellow 15° Spray Tip

15 Items

Speed up power cleaning with this rotary nozzle. Its rotating motion produces a scrubbing action to help lift dirt twice as fast! SPECIAL NOTE: Will not work with improper flow rate or nozzle size - ...

N5180 - Rotary Turbo Nozzle - Female NPT 3000 PSI

3 Items

Speed up power cleaning with this rotary nozzle. Its rotating motion produces a scrubbing action to help lift dirt twice as fast! SPECIAL NOTE: Will not work with improper flow rate or nozzle size - ...

N5180QC - Rotary Turbo Nozzle - QD 3000 PSI

3 Items

Speed up power cleaning with this rotary nozzle. Its rotating motion produces a scrubbing action to help lift dirt twice as fast! SPECIAL NOTE: Will not work with improper flow rate or nozzle size - ...

N5180QF - Rotary Turbo Nozzle - QD Filter 3000 PSI

3 Items

A variety of spray tips are listed (many others are available). Always refer to the manufacturer's recommended tip size for each pressure washer as it will greatly affect safety, performance, and flo...

T-FNPT - Female NPT x Stainless Steel Spray Tip

6 Items

A variety of spray tips are listed (many others are available). Always refer to the manufacturer's recommended tip size for each pressure washer as it will greatly affect safety, performance, and flo...

T-MNPT - Male NPT x Stainless Steel Spray Tip

49 Items

Speed up power cleaning with this rotary nozzle. Its rotating motion produces a scrubbing action to help lift dirt twice as fast! SPECIAL NOTE: Will not work with improper flow rate or nozzle size - ...

N5183 - Rotary Turbo Nozzle - Female NPT 4000 PSI

3 Items

Speed up power cleaning with this rotary nozzle. Its rotating motion produces a scrubbing action to help lift dirt twice as fast! SPECIAL NOTE: Will not work with improper flow rate or nozzle size - ...

N5183QC - Rotary Turbo Nozzle - QD 4000 PSI

3 Items

Speed up power cleaning with this rotary nozzle. Its rotating motion produces a scrubbing action to help lift dirt twice as fast! SPECIAL NOTE: Will not work with improper flow rate or nozzle size - ...

N5183QF - Rotary Turbo Nozzle - QD Filter 4000 PSI

3 Items

N5182 - Rotary Turbo Nozzle - Female NPT 2000 PSI

3 Items

Speed up power cleaning with this rotary nozzle. Its rotating motion produces a scrubbing action to help lift dirt twice as fast! SPECIAL NOTE: Will not work with improper flow rate or nozzle size - ...

N5185 - Rotary Turbo Nozzle - Female NPT 5000 PSI

3 Items

Speed up power cleaning with this rotary nozzle. Its rotating motion produces a scrubbing action to help lift dirt twice as fast! SPECIAL NOTE: Will not work with improper flow rate or nozzle size - ...

N5185QC - Rotary Turbo Nozzle - QD 5000 PSI

3 Items

Speed up power cleaning with this rotary nozzle. Its rotating motion produces a scrubbing action to help lift dirt twice as fast! SPECIAL NOTE: Will not work with improper flow rate or nozzle size - ...

N5185QF - Rotary Turbo Nozzle - QD Filter 5000 PSI

3 Items

These drain or sewer nozzles have backwards jets as well as a penetrating forward jet to cut through ice, sludge, and grease while providing enough forward thrust for a hose. Max 4000 psi, 150°C (300...

TLS - Female NPT Penetrator Mole/Laser Sewer Nozzle

5 Items

TLSQ - Quick Connect x Penetrator Mole/Laser Sewer Nozzle

5 Items

These drain or sewer nozzles have a wide spray pattern for maximum hose thrust and provide thorough pipe cleaning when the hose is pulled back (jets face backwards, no forward stream). Max 4000 psi, ...

TRS - Female NPT Back Jet Mole/Ram Sewer Nozzle

4 Items

These are highly efficient for flushing out pipes, drains, or sewers. Max 4000 psi, 150°C (300°F), stainless steel.

TRT - Female NPT Rotating Mole Sewer Nozzle

3 Items

The J5510 series has 2 rotary cleaning arms and a fiberglass body; it is designed to hover (no wheels) for cleaning rough surfaces like rooftops or rockbeds. All models have a maximum flow of 8 gpm a...

J5510-14 - 14" Whirl-A-Way Compact Base 4000 PSI (connect to gun)

1 Item

The J5515/J5514 on wheels are for driveways, walkways, asphalt, pavement, etc. J5510 is designed to hover (no wheels) for cleaning rough surfaces like rooftops or rock beds. Performance is largely de...

J5510-20 - 20" Whirl-A-Way Surface Hover Cleaner - 4000 PSI

1 Item

The J5515/J5514 on wheels are for driveways, walkways, asphalt, pavement, etc. J5510 is designed to hover (no wheels) for cleaning rough surfaces like rooftops or rock beds. Performance is largely de...

J5514-18 - 18" Commercial Duty 4000 PSI Surface Cleaner with Wheels

1 Item

The J5515/J5514 on wheels are for driveways, walkways, asphalt, pavement, etc. J5510 is designed to hover (no wheels) for cleaning rough surfaces like rooftops or rock beds. Performance is largely de...

J5514-20SS - 20" SS Commercial Duty 4000 PSI Surface Cleaner with Wheels

1 Item

The J5515/J5514 on wheels are for driveways, walkways, asphalt, pavement, etc. J5510 is designed to hover (no wheels) for cleaning rough surfaces like rooftops or rock beds. Performance is largely de...

J5515 - 20" H.D. Whirl-A-Way Surface Cleaner with Wheels - 4000 PSI

2 Items

These can be attached to lances for cleaning eaves, troughs, awnings, etc. Max 4000psi. This item is also available in retail packaging, see XJ5230.

J5230 - Gutter Snipe Attachment with Quick Disconnects

1 Item

These are great for washing sidewalks and moving debris. Maximum 4000 psi. Default brooms come with three or four part # T2515S2M spray tips (25 deg x 15), however they can be swapped out based on th...

J5522 - Pressure Washer Water Broom

2 Items

These are great for washing the underside of vehicles or equipment (versus a typical downwards spraying broom). Maximum 4000 psi. Default brooms come with three or four part # T2515S2M spray tips (25...

J5525 - Pressure Washer Under Carriage Sprayer

1 Item

Pressure regulating unloader valves automatically relieve pressure from the pump once it is shut-off which helps prolong the service life of the pump. Max 88°C (195°F). For male NPT threads, add N5...

N5140-30 - Unloader Valve - 4500 PSI, 8GPM

2 Items

Pressure regulating unloader valves automatically relieve pressure from the pump once it is shut-off which helps prolong the service life of the pump. Max 88°C (195°F). For male NPT threads, add N5...

N5141-50 - Unloader Valve - 5640 PSI, 26.4GPM

1 Item

Helps protect system from contaminants in the water line. Max 5,000 psi and 10.5 gpm. Max temperature 93°C (200°F).

N5160 - High Pressure Water Inline Filter - QC x Male NPT

1 Item

Helps protect system from contaminants in the water line. Max 5,000 psi and 10.5 gpm. Max temperature 93°C (200°F).

N5161 - High Pressure Water Inline Filter - Female x Male NPT

1 Item

Helps protect system from contaminants in the water line (6-8 gpm, 50 mesh). A garden hose adapter (N560-050BR) can be threaded into the male NPT inlet, and the body has two 1/2" NPT side ports. Max...

N5153 - NPT Water Inlet Filter (Alum Body)

3 Items

Max 300 psi.

N535GP-BR - Bypass or Gauge Port - Brass Female GHTxMNPT (1/4 NPT Port)

3 Items

Max 4000 psi.

CSTGP-B - Brass Straight Thru Coupler x Nipple w/ 1/4 Gauge NPT Port

1 Item

3/8" Male NPT Each End. 2.3mm draw, 1/4" tube.

INJECT-B7 - Chemical Injector Replacement Male NPT Body

1 Item

These are used on pressure washing machines to draw chemicals or soap into the line. They are adjustable (2-5 gpm) and include a 3ft NL5430 tube with N605 strainer (replacement tube and strainer sold...

INJECT-IN - Chemical Injector Assy For Inlet Side of Pump/GHT Ends

1 Item

These are used on pressure washing machines to draw chemicals or soap into the line. They are adjustable (2-5 gpm) and include a 3ft NL5430 tube with N605 strainer (replacement tube and strainer sold...

INJECT-OUT - Chemical Injector For Pressure Side of Pump

1 Item

These will "break away" in the event someone drives away or catches the pressure washer gun (attach between gun and pressure washer hose).

J5068 - Pressure Washer Break-Away

2 Items

These can be threaded onto the wand to protect objects from being chipped by spray tips (use with threaded tips/nozzles, not quick connect).

J5151 - Replacement Plated Steel Bushing for J5152

1 Item

These can be threaded onto the wand to protect objects from being chipped by spray tips (use with threaded tips/nozzles, not quick connect).

J5152 - Nozzle/Tip Rubber Protector & Bushing

1 Item

J5188FK - Karcher (M22) Lance - Female x MNPT

1 Item

J5188MK - Karcher (M22) Lance - Male x QD

1 Item

J5200-LANCE - Front Lance For J5200-18 & J5200-24 Wands (M22 Connection)

1 Item

See PDF link for more information. The J5510 series has 2 rotary cleaning arms and a fibreglass body; it is designed to hover (no wheels) for cleaning rough surfaces like rooftops or rock beds. The J...

J5514-PARTS - Replacement Parts for J5514-18 Surface Cleaner

12 Items

See PDF link for more information. Default unit comes with two part # T2502S2M spray tips (25 deg x 2.0), however, they can be swapped out based on the washer machine ratings.

J5515-PARTS - Replacement Parts for J5515 & J5510 Series Whirl-A-Way

1 Item

This has a 1/4" Female NPT inlet, adjustable foam spray pattern nozzle, and an adjustable flow regulator. Max 2800 psi, 5.3-6.5 gpm, and 60°C (140°F).

N5135 - Adustable Foamer Lance

1 Item

N605- is a small, high impact reinforced nylon chemical strainer that has a built-in check valve. It is commonly used for sucking up soap solutions on pressure washers. Its tapered barb will fit all ...

N605 - Mini Nylon Strainer with Check Valve

2 Items

Made of a brass body with stainless steel screen. Typically used for sucking up soap solutions on pressure washers.

N605HD - Mini Brass Strainer With Check Valve

1 Item