Our NL8210 Allcrete hose is meant to last and has proven itself as an industry leader - offering greater durability and lower overall replacement costs. It is used to convey wet cement, plaster, grout, wet shotcrete, and concrete to building structures, dams, tunnel faces, swimming pools, or construction sites. It can also be used for material handling on drilling rigs. This is a rugged, durable, high performance hose that is to be coupled with high-quality, abrasion resistant permanent swage fittings (we stock genuine 'heat treated ends' for added abrasion resistance and smooth, uninterrupted flow). NL8210 has more textile plies, a higher quality tube, and a more kink resistant wall as compared to competing brands on the market (we also offer NL8209 Generic brand for such applications). The NL8211 (NL8216 Conti brand) has a steel wire reinforcement designed to handle wet concrete with high head pressures at the critical flex areas on boom trucks. It is also used as a discharge hose on the delivery end of high pressure pumps. Listed below, we also offer part numbers for popular assemblies (suffix is -HD for heavy duty flanges both ends, -H1 for heavy duty flange on one end only, and -VG for Victaulic grooved both ends).

Construction: Tube: Smooth, black Chemituf rubber. Cover: Wrapped, smooth, black SBR rubber. Reinforcement: Multiple spiral plies of high strength fabric (NL8210) or spiral plies of high tensile steel wire (NL8211).

Typical Fittings: WFT-CS Heat treated swaged ends (HD California flanged ends for concrete pump hose, DO NOT use Grooved or NPT ends for concrete pump service). N95 Galvanized Internal Expansion (1"-1-1/2"). Whipcheck Safety Cables & Nylon Slings (must be properly installed in an extended position). *SPECIAL NOTE: Concrete hose is typically not repaired as the wall/tube will wear down and therefore the coupling integrity is significantly compromised if re-installing an end.

Temperature Range: -35°C (-31°F) to +80°C (176°F)

Detail Comments: Working pressures shown based on this hose being used to transfer concrete, not for water or other fluids. For non-concrete applications the working pressure will vary depending on the safety factor required (as an example for water, certain sizes could be rated to 500-600 psi). *SPECIAL NOTE: Concrete hose is typically not repaired as the wall/tube will wear down and therefore the coupling integrity is significantly compromised if re-installing an end.

Warning: Critical Application-Follow Coupling/Maintenance Procedures