Nylon waterblast is a lightweight, amazingly flexible hose designed for very high pressure waterblasting or cleaning. Although more expensive than the rubber waterblast, the nylon is much lighter in weight and provides greater resistance to dragging friction, pressure loss, gouging, abrasion, and weathering. Due to the critical nature of these hoses, always visually inspect for exposed/damaged reinforcement, rust, cracks, bubbles, or kinks before and after each use. Dirty water, lack of draining, and improper suspension devices will shorten the life of this hose as well as exceeding the bend radius or crushing the wall. We offer the nylon waterblast in several working pressures listed below; all types are resistant to weathering, oil, abrasion, and high heat. Hydrostatic testing and certification are available on special request. Standard lengths come with solid NPT ends (assembly part #'s are ie NL770-025Xlgth). Higher pressure hoses and special tube compression fittings are also available on special request. Do not use swivel ends as the o-ring can blow out. Only use components specifically rated for high pressure waterblast applications.

Construction: Tube: Smooth, Polyamide. Cover: Smooth, Green Polyoxymethylene. Reinforcement: Multiple layers of high-tensile steel wire.

Typical Fittings: This is a CRITICAL PRESSURE HOSE, follow assembly procedures carefully. Factory attached solid male NPT crimp ends, waterblast quick connects. This hose is not designed to be repaired due to the critical nature of ultra high pressure water. Whipcheck Safety Cables.

Temperature Range: -30°C (-22°F) to +80°C (176°F)

Warning: This Hose Used in Dangerous Applications. Do NOT Repair.

Cut Method: Bench Mount Electric Saw // Wear Ear & Eye Protection